Veratron 0-5 Volt LinkUp Converter

VERATRON 0-5 VOLT LINKUP CONVERTER
loader
Loading...
Order Table
DS1462-99568 B00059201 $154.70
Out of stock
Out of stock notification

Are you sure to add a notify email ?

Part No. MPN Price Actions

Shipping Quote form

Shipping Address :

Details
Reviews
Return Policy
Shipping Policy
Technical Information Guide

0-5 Volt LinkUp Converter

Easily installed LinkUp gateway modules replace the original wiring, delivering power to both the LinkUp device and the sensor from the NMEA 2000 backbone while being still compliant with the NMEA 2000 certification.

Thanks to their passive wireless receiver, the configuration is done in a snap by using your mobile device and the LinkUp Configurator app available for Android and iOS devices. The parameters of the sensor are configured to type, instance, and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download.

Before describing the different versions of LinkUp, we would like to highlight the fact that this device is a money saver compared to an over-designed NMEA 2000 converter. It reduces wiring, since the complete device – consists of 3 parts: a 30 cm wire pigtail with a standard M12 connector with 5 pins, the LinkUp device itself containing the device electronics, notification LED, wireless interface to program the device, and the NMEA 2000 side wiring, which is the output of all the LinkUp variants and finally a sensor-side cable – including the wires is approx. 50 cm long when unrolled.

The other benefits of this equipment are the contactless configuration with your smartphone, no need to spend money on an expensive HW, and no need for a power supply since the LinkUp is powered by NMEA.

Last but not least, thanks to its air-sealed housing, the device can be installed in the engine compartment according to ISO 8846:1990 (protection against ignition of surrounding flammable gases). As with all our products, LinkUp is CE, Reach, and RoHS compliant.

These powerful devices are fast, efficient, secure, safe, and cost-effective.

Features:

  • Wireless configurable via a smartphone app
  • Customizable sensor curves
  • Approved for engine compartments acc. to ISO8846:1990
  • Provides 5V-Source for passive sensors
  • Alarms setup and transmission on NMEA 2000®
  • Plug-and-Play installation
  • NMEA 2000® certified

Technical Specifications:

  • Operating voltage - 12V (from NMEA 2000®)
  • Input signal range - 0-5V
  • Protection class - IP X9/K
  • Power consumption - ≤ 100mA
  • Output current on 5V-source - 15mA
  • Output signal - NMEA 2000®
  • Dimensions - 125 mm x 32 mm (+cables)
  • Operating temperature - -30°C to +80°C
  • Flammability - UL94
  • Housing material - PC-FR
  • Compliance - CE, UKCA, Reach, RoHS, ISO8846:1990

In the Box:

  • LinkUp Gateway – 0-5V 
  • Veratron Card 
  • Safety Manual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Are you a business?

Join our free B2B program today and gain access to exclusive industry discounts on a wide range of products. Whether you’re a small business or a large enterprise, our discounted rates can help you save on every order. Sign up now to start shopping at special B2B prices!

Apply Now

RETURN POLICY


We accept returns on most items within 30 days of delivery.

To start a return, submit a Return Authorization (RA) request using the form below. The RA must be issued within 30 days of the delivery date, and the item must be received back at our warehouse within 14 days of the RA being issued.


Requirements for a full refund include:

1. Item must be in new, uninstalled condition.

2. Item must be returned with all original packaging, hardware, and accessories.

3. Return shipping is prepaid by the customer unless the item arrived damaged, defective, or incorrect due to our error.

4. RA number must be clearly marked on the outside of the package.


NON-RETURNABLE ITEMS: The following are final sale and cannot be returned:

- Special order, built-to-order, or custom items

- Items cut, drilled, modified, or installed

- Items missing original packaging or accessories

- Items without proof of purchase


General - Cancellations, Shipping Damage, Missing Packages, Shipment Refusals:
Claims of shipping damage, incorrect items, or missing items must be reported within seven (7) days of delivery. For LTL freight shipments, damage must be noted on the delivery receipt at the time of delivery. Concealed damage claims after a clean signed POD are difficult to recover and may be denied by the carrier. Orders that have been processed and shipped cannot be cancelled, and you may need to wait until you receive the merchandise in order to return it. Customer is responsible for all costs associated with refused shipments including carrier fees, freight to the customer, and return freight. We reserve the right to refuse returns that are sent COD, without a return authorization, show signs of undisclosed installation/use, have missing parts/packaging, missing proof of purchase, or have SKU numbers that do not match our records. If you do not comply with any of the above conditions, we reserve the right to refuse the return/exchange, or to impose different or additional conditions.

Must Be Returned to the Following Address:

Marine Depot Direct
Returns Department
14716 Central Ave
Chino CA 91710

 

PARTIAL REFUNDS OR RESTOCKING FEES

Condition Refund
New condition, within 30-day window 100% of the item price (less return shipping)
New condition, past 30-day window (case-by-case)* 80% of the item price
Items that are damaged, missing parts, not in the original condition, or have obvious signs of use for reasons not due to our error Up to 50% of the item price
Products that are unusable, destroyed, or incomplete to the point of no resale value 0% of the item price

*For most items, the return window is 30 days after delivery. LTL freight items, oversized items, and large hardware assemblies may be subject to an additional restocking fee to cover return freight and inspection. This will be disclosed when the RA is issued.

 

How Refunds Are Issued

If you're receiving a refund after we have received your item, it may take an additional three to five business days to process your return fully and issue your refund.

Once we issue your refund, it may take additional time for your funds to be made available in your account by your financial institution. See the following table for more details.

Refund Method Refund Time (After Refund Is Processed)
Credit card Three to five business days
Debit card Up to 10 business days
Checking account Up to 10 business days
Shipping

In-stock items ship within 1 business day from our California or Florida warehouse. Items showing a lead time above ship once stock arrives at our warehouse.


> Same-day shipping on orders placed before 9:00 AM Pacific Time

> Standard ground delivery is 3-7 business days. Need it sooner? Choose Next Day Air or 2nd Day Air at checkout.

> Free shipping on U.S. orders over $99 (excluding AK and HI)

> Oversized items ship by LTL freight. Inspect the shipment and note any damage on the delivery receipt before signing.

> International shipping to Canada and other countries available at checkout


For full details, see our Shipping Policy.

  • Brochure Literature View
  • Owners Manual View